Suspended Solids Sensor in Wastewater

This industrial suspended solids (SS) sensor is designed for wastewater treatment, measuring MLSS/SS/total suspended solids in real time using infrared absorption/scattering principle. It offers IP68 submersible design, auto-cleaning brush, RS485 + 4–20mA output, ideal for aeration tanks, return sludge, effluent and biological reactors.

Product Introduction

Suspended Solids Sensor for Wastewater | Online MLSS/SS Turbidity Probe

This industrial suspended solids (SS) sensor is designed for wastewater treatment, measuring MLSS/SS/total suspended solids in real time using infrared absorption/scattering principle. It offers IP68 submersible design, auto-cleaning brush, RS485 + 4–20mA output, ideal for aeration tanks, return sludge, effluent and biological reactors.

Suspended Solids Sensor for Wastewater | Online MLSS/SS Turbidity Probe

This wastewater suspended solids sensor adopts infrared (850/880nm) optical absorption/scattering method to accurately measure suspended solids (SS), mixed liquor suspended solids (MLSS) and sludge volume index in activated sludge systems. It uses dual-beam optical compensation to eliminate light source aging and fouling interference.Equipped with an optional automatic cleaning brush to prevent biofilm buildup and reduce manual maintenance. Built-in temperature compensation ensures stability in 0–50°C. The probe outputs RS485 Modbus-RTU + 4–20mA for direct connection to PLC/DCS/SCADA.Housing: 316L stainless steel + PPS, IP68 waterproof, 3/4" NPT/PG13.5 thread for immersion/pipeline installation.

Suspended Solids Sensor for Wastewater is an industrial online digital probe designed specifically for suspended solids (SS) monitoring in various wastewater environments. It uses optical scattering/turbidity-ranging technology to achieve stable and accurate measurement with strong anti-interference capability.

This sensor supports standard RS485 MODBUS-RTU communication and optional 4–20mA analog output, enabling seamless connection with PLC, DCS, RTU and wastewater monitoring platforms. Isolated power supply and built-in protection circuit ensure reliable operation in complex industrial wastewater sites with electromagnetic interference.

It features automatic cleaning (wiper/brush control) to avoid fouling and maintain long-term accuracy. Automatic temperature compensation and power-off calibration storage further reduce manual maintenance. The IP68 waterproof and corrosion-resistant PPS housing supports long-term submerged installation with standard 3/4-inch threads.

It is widely used in municipal wastewater treatment plants, industrial wastewater discharge, aeration tanks, sedimentation tanks, recycling water systems and other wastewater scenarios requiring online suspended solids monitoring.

Technical Specifications

Parameter

Range

5001

Measurement Principle

90° Scattering (Optical)

Measurement Range

0–4000 mg/L

Resolution

0.01%

Accuracy

±5.0% F.S.

Temperature Range

…60°C (Optional)

Temperature Compensation

None

Pressure Range

0–3 bar

Housing Material

316 Stainless Steel

Power Supply

DC 9–30V (Recommended 12V)

Output Signal

RS485, 4–20mA

Cable Length

Standard 5m (Customizable)

Electrical Connection

Pin-Type

Installation Method

Submersible

Protection Rating

IP68

Send Inquiry

We are committed to providing you with the best quality service and look forward to communicating with you to solve problems together and bring you a better experience.